

=============================================================================
Tyco Safety Products       RDU_DatabaseConverter V1.00           9 March 2009
=============================================================================

RDU_DatabaseConverter.exe is used to convert an RDU Mk1 V2.XX database to an
RDU Mk2 database.  It takes an S2/S8 database file (extension .S28) generated 
by an RDU Mk1 as an input file and produces an S2/S8 database file that can be
loaded into an RDU Mk2.  Refer to LT0499 RDU Mk2 Programming manual 
section 7.6 (issue 1.0) for more detail on the database conversion process.


Installing
==========
There are three files in the zip file as follows  - these should be extracted 
to any folder of your choosing.

RDU_DatabaseConverter.exe
rdu_mk2_v500_maf_bd_default_database.s28
ReadMe.txt (this file)


Running the converter
=====================
The converter program takes an input filename and output filename as parameters
as follows.  A filename should be enclosed in double quotes if it has any
embedded spaces.

RDU_DatabaseConverter.exe input_filename output_filename 4428

There is an optional third parameter (4428) that can be used
to have AS44428 operation selected in the output database.
                          

NOTE 1
======
The database converter will enable battery tests in the output database (for 
an RDU with a MAF board) so it is necessary to ensure that any battery test
resistors (R52, R53) are removed from the MAF board.


NOTE 2
======
"RDU Mk1" refers to an RDU running V2.XX software.  "RDU Mk2" refers to an RDU 
running V5.XX software.  


NOTE 3
======
KCRCWIN.exe gives the following checksums

rdu_mk2_v500_maf_bd_default_database.s28		
MD5 : 2c64 fbea 5931 d0d7 6440 c6f7 6714 40f2
CRC32 : 6d38 a0eb

RDU_DatabaseConverter.exe	(V1.00)
MD5 : 587f 6d01 e008 f489 e83c b2a8 3551 bcbf
CRC32 : 70f1 573b
